Modeling Predicts Cure And Thermal Endurance Of Advanced Packaging Underfill (NIST, UCSD et al.)

Researchers at the NIST, UCSD et al. published a technical paper titled “Predicting Cure Evolution and Thermal Endurance of a Highly Filled Epoxy Underfill for Advanced Packaging.”

Abstract Excerpt: “Epoxy underfill materials are critical to advanced semiconductor packaging by enhancing mechanical integrity, redistributing thermomechanical stresses, and improving solder-joint reliability in flip-chip and other fine-pitch interconnect architectures. Their performance is strongly influenced by cure evolution during processing and thermal stability during service, making quantitative evaluation important for process optimization and long-term reliability assessment. The cure kinetics and thermal degradation behavior of a highly-filled epoxy underfill were investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and diffusion-incorporated kinetic modeling. Isoconversional analysis showed that the apparent activation energy varied with conversion and increased sharply at high conversion, indicating multi-step cure behavior and diffusion control. A two-step modified Kamal–Sourour model incorporating diffusion control in the second step improved prediction of conversion after vitrification and was used to predict cure evolution under a designed oven cure schedule, which achieved nearly complete cure. Cryomilling improved TGA reproducibility without causing detectable chemical changes. Analysis following the ASTM E1641/E1877 protocols revealed a strong temperature dependence of estimated thermal endurance based on a 5% mass-loss criterion under nitrogen. Together, the results provide a quantitative framework for predicting cure evolution under practical thermal schedules, evaluating late-stage diffusion effects, and estimating degradation-based thermal endurance for highly-filled industrial thermosets.”

Find the technical paper here. August 2026.

Tao, R. , Giang, R. , Moukhina, E. , Forster, A. , Cho, T. , Centellas, P. , Romberg, S. , Tsinas, Z. and Soles, C. (2026), Predicting Cure Evolution and Thermal Endurance of a Highly Filled Epoxy Underfill for Advanced Packaging, Journal Of Polymer Science, [online], https://doi.org/10.1002/pola.70283, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=962138

 

 

The post Modeling Predicts Cure And Thermal Endurance Of Advanced Packaging Underfill (NIST, UCSD et al.) appeared first on Semiconductor Engineering.