Vishay Introduces 550 V and 600 V Snap-in Power Capacitors for High-Voltage Applications

New Capacitors Help Reduce Component Count, Save Space, Cut Costs and Improve Reliability in High-Voltage Designs.
Vishay Intertechnology has expanded its 259 PHM-SI series of snap-in power aluminum electrolytic capacitors by introducing new 550 V and 600 V versions. Developed by Vishay BCcomponents, these capacitors are designed for high-voltage applications in industrial equipment, energy systems and medical devices. The new options can help designers use fewer components, save circuit board space, reduce costs and improve the reliability of power systems.
Traditionally, engineers have needed to connect three 400 V to 450 V capacitors in series to handle DC bus voltages between 800 V and 1100 V. This arrangement requires additional balancing resistors, increases circuit complexity and creates more potential points of failure.
With the new 550 V and 600 V capacitors, designers can use fewer components in series and reduce or eliminate the need for voltage-balancing circuits. This helps save circuit board space, lower component costs and improve system reliability and service life by providing greater voltage-handling capacity.
The new 550 V and 600 V capacitors offer high capacitance and voltage ratings in a range of compact sizes. Available configurations include 330 µF / 550 V and 330 µF / 600 V in the 35 mm x 45 mm case, and 470 µF / 550 V and 390 µF / 600 V in the 35 mm x 55 mm case. At these values, the 259 PHM-SI series offers ripple current ratings from 2.14 A to 2.58 A, allowing the capacitors to withstand the demanding switching currents of today’s high power converters. Featuring a cylindrical aluminum case insulated with a blue sleeve, the RoHS-compliant devices are also available with 3-pin keyed polarity snap-in terminals.
As polarized aluminum electrolytic capacitors with a non-solid electrolyte, 259 PHM-SI series devices are ideally suited for buffering, filtering, and energy storage in compact power applications. These include wallboxes and stationary electric vehicle (EV) chargers; industrial motor drives, heating and cooling systems, lamp drivers for UV water treatment systems, plasma cutters, switch cabinets, and UPS; wind turbines and solar panel inverters; and medical instrumentation. With their useful life of more than 3000 h at +105 °C, the capacitors provide more than 10 years of lifetime in ambient temperatures up to 60 °C for these applications.
Device Specification Table:
| Part number | 259 PHM-SI | |
| Case size (D x L in mm) | 22 x 25 to 35 x 60 | |
| Capacitance range | 39 µF to 2200 µF | |
| Tolerance | ± 20 % | |
| Ripple current at 100 Hz and +105 °C | 0.53 A to 4.42 A | |
| Rated voltage | 200 V to 450 V | 500 V to 600 V |
| Category temperature range | -40 °C to +105 °C | |
| Useful life at +105 °C | > 3000 h | |
| Max. ESR at 100 Hz | 80 mΩ to 3.31 Ω | |
| Max. impedance at 10 kHz | 60 mΩ to 2.44 Ω | |
| Sectional specification | IEC 60384-4 / EN 130300 | |
| Climatic category IEC 60068 | 40 / 105 / 56 | 25 / 105 / 56 |
The post Vishay Introduces 550 V and 600 V Snap-in Power Capacitors for High-Voltage Applications appeared first on ELE Times.