The Race to Commercialize Gallium Oxide Wafers and Devices

As wide bandgap (WBG) semiconductors, such as silicon carbide (SiC) and gallium nitride (GaN), gain momentum in mainstream industrial and automotive applications, visionaries have begun to look into the next frontier: ultra-wide bandgap (UWBG) devices. In a little over a decade, UWBG semiconductor gallium oxide (Ga2O3) technology, wafers, and devices have made significant progress to come out of the lab and move in the direction of the commercial world.
Since the first demonstration of the Ga2O3 transistor by Japan’s National Institute of Information and Communications Technology (NICT) in 2011, several others have joined the race to commercialize UWBG technology. This list includes Japan’s Novel Crystal Technology (NCT), Kyoto-based startup Flosfia, Raleigh, NC, USA-based Kyma Technologies, and South Korean enterprises PowerCubeSemi and ETRI, as well as China’s Hangzhou Garen Semiconductor Co. While these companies are spearheading the development of β-Ga2O3 and α‑Ga₂O3 substrates and epitaxial wafers, several device makers, like Gallox Semiconductors, have also joined the race.
NCT’s substrate development
Since the substrate is the base on which a device structure is built, this article investigates developments on this front before moving on to advances in device development. One such example is Japan’s NCT, a spin-out of Tamura Corp. and Japan’s NICT.
NCT has been developing Ga2O3 substrates for the last 11 years. The company currently produces 4-inch (100-mm) wafers and is sampling 6-inch (150-mm) substrates to key device makers globally (Figure 1).

According to a statement sent by NCT via email, “If development continues to progress smoothly, we plan to start selling commercial-grade prototyping substrates and epi-wafers by April 2029. We anticipate that device manufacturers will begin developing power devices for commercialization using these 150-mm wafers around this time, so we plan to scale up our production volume gradually from April 2029 onward.”
In their email statement, the NCT added the status of their manufacturing timelines: “Our manufacturing equipment for wafers up to 100-mm is located at our headquarters in Sayama City, Saitama Prefecture, Japan. We do not yet have a full-scale production facility dedicated to 150-mm wafers. We intend to make capital investments and determine appropriate production capacities by closely monitoring market trends and the commercialization development timelines of power device manufacturers.”
Assuming the commercial rollout of NCT’s 150-mm wafers proceeds as planned and secures sufficient R&D funding, the company plans to begin selling commercial-grade prototyping 8-inch (200-mm) substrates and epi-wafers by April 2033.
Before sampling the 150-mm β-Ga2O3 substrates to key customers, NCT researchers demonstrated the basic operation of a high-breakdown-voltage (1 kV) gallium oxide inverted double-implanted MOS transistor (DI-MOSFET) with a sufficiently high voltage (6 V). These efforts were part of the “Research and Development of Inverted MOS Channel Type Gallium Oxide Transistor” program associated with the National Security Technology Research Promotion Fund (JP004596).
This achievement is groundbreaking and will greatly advance the development of medium-to-high voltage (0.6-10 kV) gallium oxide transistors, NCT stated. Details of this development were presented at the 83rd Japan Society of Applied Physics Autumn Meeting Symposium on September 26, 2022.
In March 2026, NCT began shipping 6‑inch (150-mm) β-Ga₂O₃ substrates to key partners, with plans to deliver 150-mm Ga₂O₃ epitaxial wafers in 2027 for device development. Full‑scale mass production of 6-inch Ga₂O₃ substrates and epiwafers will begin in 2029, enabling commercialization of high‑voltage, high‑power devices. The research company expects to introduce 8-inch (200-mm) Ga₂O₃ wafers to further improve yield, reduce costs, and expand device capabilities.
Other Ga2O3 suppliers in the race
NCT + Kyma Technologies
Concurrently, NCT is collaborating with Kyma Technologies in the US to develop Ga2O3 epiwafers for high-voltage power electronics applications like EVs, renewable energy, aerospace, and industrial systems (Figure 2).

The two companies will combine their expertise (NCT high-quality Ga2O3 substrate + Kyma’s advanced epi growth) to develop processes that produce large-area (150-mm diameter) epiwafers suitable for multi-kV level power devices. “Our partnership leverages the best of both companies’ technologies to push the boundaries of Ga2O3 epiwafer production,” said Heather Splawn, President & CEO of Kyma. Likewise, Akito Kuramata, President & CEO of NCT, added, “Together, we aim to accelerate the adoption of Ga2O3 devices worldwide, supporting critical industries and technology sectors.”
Hangzhou Garen Semiconductor
Meanwhile, China’s Hangzhou Garen Semiconductor Co. Ltd. has also announced the mass production of 6‑ and 8‑inch homoepitaxial β-Ga₂O₃ wafers, with 6‑inch products already delivered to device makers. These are compatible with existing silicon-based 8-inch production lines.
The manufacturer said the product is expected to accelerate gallium oxide’s transition from laboratory validation to volume production and industrial applications. Plus, the 8‑inch substrate is part of a fully integrated production chain covering cast‑growth single crystals, substrate processing, and MOCVD homoepitaxy (Figure 3).

The test results of the epitaxial wafer show that the epitaxial film thickness is > 10 μm with a thickness variance σ < 1%. The average carrier concentration of the epitaxial layer is 1.79×10¹⁶ cm⁻³. According to Hangzhou Garen, it is the world’s first mass‑production line compatible with both 6‑inch and 8‑inch homoepitaxial gallium oxide wafers.
Other notable developments in China include Hangzhou Garen Semiconductor’s announcement of its 10-μm thick homoepitaxial Ga2O3 wafers passing the Schottky barrier diode (SBD) validation at Xidian University. The SBD demonstrated a breakdown voltage of 1,090–1,490 V (without termination structures) and on‑resistance of 2.6–4.5 mΩ·cm². Both metrics confirm a low defect density. According to the developers, these results are significant for >600 V power electronics in EVs, grids, and industrial drives.
Commercializing Ga2O3 power devices
Gallox Semiconductors
On the device front, NCT is supplying epi-wafers to several developers in Japan, North America, Europe, and China, who are working to commercialize Ga2O3 diodes and MOSFETs. One such developer in North America is the Cornell University spin-off, Gallox Semiconductors, based in Ithaca, NY.
According to Gallox Semiconductors’ CEO and founder Jon McCandless, “The momentum behind Ga2O3 semiconductors is building, while wafer diameters are scaling rapidly, and the supply chain is growing with strong interest from customers. These market conditions, together with surging demand for more efficient power systems, are speeding gallium oxide’s transition from the lab to the commercial reality.”
Additionally, Gallox is working closely with partners across the entire supply chain, from wafer producers to commercial fab partners to back-end processing firms. McCandless said, “Rather than building in isolation, we’re shaping our roadmap around what our customers need.”
McCandless added the three planned phases of their Ga2O3 commercialization:
- Engineering samples
- Qualified production devices and pilot programs
- Customer design-in and qualification
The rapidly evolving data center market is a major driver for the company, as well as emerging applications like solid-state transformers (SSTs), next-generation power systems, and AC-DC converters, including defense. Gallox is targeting availability of engineering samples in the first half of 2027 (Figure 4).

Gallox is aiming to fabricate>2000 V gallium oxide devices with on-resistances (RDS(on)) lower than SiC and optimized thermal and switching characteristics for end applications. The current capability of the device will be 100 A or higher. “Because it is an all-oxide device, the reliability is promising,” stated McCandless.
Meanwhile, it is developing and fabricating sample devices using in-house Cornell Nano Fab and external research-based facilities, and planning to use commercial fabs down the road. In fact, the company is planning to deliver discrete packaged samples from commercial fabs in late 2027, and module samples in 2028.
Flosfia
Concurrently, Kyoto University spin-off Flosfia has moved out of the lab and into the commercial zone to supply SBDs and MOSFETs for a number of applications. Using its proprietary mist chemical vapor deposition thin-film technology, the company specializes in growing corundum‑structured α‑Ga₂O₃ thin films.
This non‑vacuum process enables high‑quality films at lower manufacturing cost compared to conventional high‑vacuum methods, stated Flosfia. Meanwhile, they have verified their process for producing 4‑inch α‑Ga₂O₃ wafers—a critical step for volume production—and have also demonstrated a prototype p‑type gallium oxide MOSFET, achieving the world’s first normally‑off operation with over 10 A drain current using its proprietary p‑layer technology. The company is supplying its gallium oxide devices to customers in Japan.
PowerCubeSemi
In South Korea, PowerCubeSemi is actively developing and commercializing high‑voltage Ga₂O₃ devices, including 1,200 V power semiconductors for EVs and up to 10 kV gallium oxide sensors for industrial fire detection.
ETRI
Likewise, in collaboration with the Korea Institute of Ceramic Engineering and Technology (KICET), the Electronics and Telecommunications Research Institute (ETRI) has successfully developed Korea’s first 3 kV‑class Ga₂O₃ power MOSFET device, along with the core epitaxial material and process technologies.
The race to commercialize gallium oxide
With strong R&D investment, market growth, and strategic competition, the race to build commercial gallium oxide substrates and power devices, both diodes and MOSFETs, is heating up. While UWBG technology offers many advantages, some fundamental hurdles must be overcome before it achieves mainstream adoption.
The post The Race to Commercialize Gallium Oxide Wafers and Devices appeared first on Power Electronics News.