PartsCube Global

Back to Home
ELE Times

Murata Introduces MGJ2T2 Isolated DC-DC Converters for High-Voltage SiC Gate Drives

ELE Times

Murata Manufacturing Co., Ltd. has introduced the MGJ2T2 series of isolated DC-DC converters designed to drive high-voltage silicon carbide (SiC) power devices. The new 2W converters provide 8kVDC isolation, low isolation capacitance of 2.5pF and common-mode transient immunity (CMTI) of more than 200kV/µs. These features help protect sensitive gate-drive circuits from high-voltage electrical interference. The converters are designed for use in energy storage and distribution systems, motor drives and EV charging equipment.

The MGJ2T2 series operates with a 24V input and delivers +18V/-3V outputs to control SiC MOSFETs. The +18V supply switches the MOSFET on, while the -3V supply helps switch it off reliably and prevents unwanted turn-on.

Fast switching in SiC-based power converters produces rapid voltage changes that can couple electrical noise across the isolation barrier between the power stage and its control circuitry. The low 2.5pF isolation capacitance of the MGJ2T2 series limits this coupling, while CMTI of more than 200kV/µs enables it to tolerate rapid common-mode voltage transitions. Together, these characteristics help maintain effective separation between the high-voltage switching environment and low-voltage control electronics.

Murata achieves this performance using its proprietary Block-Coil technology. Separate windings are formed on solid insulating formers, providing physical separation between the primary and secondary circuits while reducing the capacitance between them. The construction provides more than 8mm of creepage and clearance, while the solid insulation barrier provides high partial-discharge tolerance.

The MGJ2T2 series supports reinforced insulation at working voltages up to 800Vrms, or basic insulation up to 1600Vrms, and is tested to withstand 6kVDC across the isolation barrier. Designed to meet UL 60664-1, which provides further assurance of the insulation system’s safety performance. These characteristics allow the gate-drive supply to operate where the control electronics and SiC power stage are at substantially different voltage potentials.

The same characteristics are relevant to emerging solid-state transformer (SST) architectures. SSTs use high-frequency power conversion and can divide high input voltages across multiple cascaded switching stages. Each switching element requires an isolated gate-drive power supply, making isolation and noise immunity between the individual power stages and their control circuitry particularly important.

Operating from -40°C to +125°C and supplied in an SIP package. Target applications include ESS and BESS, microgrids, motor drives, industrial automation, EV charging and heat pumps.

The post Murata Introduces MGJ2T2 Isolated DC-DC Converters for High-Voltage SiC Gate Drives appeared first on ELE Times.

📄 Disclaimer: This article was originally published on ELE Times. PartsCube Global republishes this content for reference purposes only. All rights, including copyright, belong to the original publisher.

← Back to PartsCube Global