PartsCube Global

Back to Home
ELE Times

Murata Introduces SCI36LT Intelligent IMU with Integrated MEMS Sensors and Embedded Processor

ELE Times

Murata Manufacturing Co., Ltd. has introduced the SCI36LT Series, a range of intelligent inertial measurement units (IMUs) that combine six-degree-of-freedom (6-DoF) MEMS sensors with an integrated microcontroller (MCU) in a compact package. The series includes two models: the SCI36LT-K01, which uses Murata’s sensor fusion algorithm to provide accurate orientation data, and the SCI36LT-K02, which allows customers to develop and run their own software on the built-in MCU. By handling sensor data processing directly within the IMU, both models reduce the workload on the main system processor. The K01 also reduces the need for customers to develop their own sensor fusion software, while the K02 offers greater flexibility for application-specific processing.

Traditional IMUs measure an object’s angular movement and linear acceleration, but the collected sensor data must then be processed by a separate microcontroller or processor to determine the object’s orientation. This requires additional computing power and technical expertise to develop and fine-tune sensor fusion algorithms, calibrate sensors and optimize overall system performance.

Drawing on Murata’s vertically integrated expertise in MEMS, sensor fusion, electronics, and packaging, the SCI36LT family combines a high-performance MEMS sensor, an embedded MCU, supporting electronics, and passive components within a single compact platform. This enables sensor data processing to be moved closer to the sensing element, reducing the processing burden on the host and providing greater flexibility over how inertial data is used within the end system.

Two Launch Variants for Integrated and Custom Software

SCI36LT-K01: Turnkey solution with proprietary Murata Software & algorithm. Combines Murata’s high performance IMU with its proprietary sensor fusion algorithm, running on the integrated MCU to calculate pitch, roll, and relative yaw. The device combines a ±490°/s gyroscope with a ±16 g accelerometer and provides calculated orientation in either Euler angle or direction cosine matrix (DCM) format. Configurable algorithm dynamics and output data rates allow sensor behaviour to be optimized for different motion profiles and system requirements.

SCI36LT-K02: Open platform for Custom Software Development uses the same integrated IMU and MCU architecture but does not include Murata’s sensor fusion algorithm. Instead, customers can program the embedded MCU with their own software, allowing application-specific processing to be performed directly within the sensor component rather than on the host system.

For the SCI36LT-K01, integrated calibration features support module-level calibration after the sensor has been incorporated into the end system, simplifying compensation at PCB or module level. These capabilities make the SCI36LT family well suited to demanding industrial and robotic applications, including grade control for heavy machinery and excavators, dynamic inclination sensing in construction machinery and industrial equipment, support for real-time kinematic (RTK) positioning in surveying equipment and autonomous systems, motion sensing in humanoid robots, and commercial drones applications in agriculture, infrastructure and facility management, civil engineering and construction, and logistics.

Highly Integrated Architecture in a Compact Industrial Package

Measuring just 11.2 × 9.2 × 2.9 mm (0.44 × 0.36 × 0.11 inches), the SCI36LT family integrates Murata’s high performance MEMS technology with an MCU, passive components, and crystal resonator in a single compact LGA package. This high degree of functional integration removes the need for external components required and enables sophisticated inertial sensing to be incorporated into space-constrained system designs. The device supports 3.1 V to 5.5 V supply and operates across -40°C to +85°C temperature range, making it suitable for demanding industrial operating environments.

“The increasing sophistication of industrial and robotic motion-control systems is creating demand not only for high performance inertial sensing but for greater processing flexibility directly at the sensor,” said Juhani Pelttari, Senior Manager, Business Development at Murata Europe. “By combining high-performance MEMS with embedded processing in a single compact platform, SCI36LT gives designers greater flexibility over where and how inertial data is processed, helping reduce integration effort at system level.”

The common SCI36LT architecture will also provide a foundation for the wider product family and future application specific sensing and software implementations. Future models can combine different algorithms and IMU calibration= configurations to address the requirements of specific applications, extending the platform beyond the two initial launch variants. The SCI36LT Series comprises the SCI36LT-K01 and SCI36LT-K02. Samples are available now, with mass production scheduled to begin in Q1 2027.

The post Murata Introduces SCI36LT Intelligent IMU with Integrated MEMS Sensors and Embedded Processor appeared first on ELE Times.

📄 Disclaimer: This article was originally published on ELE Times. PartsCube Global republishes this content for reference purposes only. All rights, including copyright, belong to the original publisher.

← Back to PartsCube Global