LM358 Alternatives & Replacements: Complete Pin-to-Pin Guide

Why Look for LM358 Alternatives?

The LM358 is a dual operational amplifier introduced nearly 50 years ago—and it's still one of the most widely used ICs on the planet. It's also the op-amp we still get asked to quote more than any other, and in 2025-2026 that's become a problem. Buyers face:

• Long lead times from major manufacturers (8-20+ weeks)
• Price volatility during semiconductor shortages
• Minimum order quantities that don't fit prototype runs
• End-of-life (EOL) notices on some variants

Whether you need an LM358N, LM358DR2G, LM358P, or any other suffix variant, these alternatives will get your designs moving.

---

Direct Pin-to-Pin Replacements (No PCB Change)

1. LM2904 — The Industrial-Grade LM358

The LM2904 is arguably the best LM358 replacement. Both are made by TI, ST, and onsemi. The LM2904 has a wider temperature range (-40°C to +125°C vs 0°C to 70°C) and is often cheaper. When we see "LM358 out of stock" on a distributor page, this is the part we point buyers to first.

Trade-off: Slightly lower max supply voltage (26V vs 32V). For 3.3V and 5V systems it's a non-issue — just confirm nothing in your design rides the full 32V rail.

2. LMV358 — Low-Voltage Variant

• Voltage: 2.7V to 5.5V (ideal for 3.3V systems)
• GBW: 1 MHz
• Rail-to-rail output
• Lower Iq: 105µA per channel

It drops into the same footprint as the LM358. Use this when your design runs on 3.3V and you want rail-to-rail performance. Not suitable for ±15V or 12V single-supply applications — it simply doesn't have the headroom.

3. LM358-Specific Suffix Swaps

Sometimes the fix is simpler than a redesign. If you have the PCB footprint but need to change the package/suffix:

4. RC4558 — Dual Op-Amp Alternative

• Why: 3MHz GBW vs LM358's 1MHz
• Package: DIP-8 and SOIC-8 compatible
• Better for: Audio applications
• Trade-off: Higher supply current

5. NE5532 — For Audio Applications

• GBW: 10MHz (vs 1MHz)
• Slew Rate: 9V/µs (vs 0.3V/µs)
• Best for: Audio preamps, active filters

---

Domestic / Chinese Alternatives (Price Advantage)

This is where the real savings are. These alternatives can save 40-70% on your BOM:

6. 3PEAK TP2581 / TP2582

• Pin-compatible with LM358 (SOIC-8, DIP-8)
• Rail-to-rail input and output
• GBW: 1.2MHz
• Supply: 2.5V to 5.5V
• Best for: 5V single-supply systems where LM358 is used in its sweet spot
• Price: ~$0.10-0.15 vs LM358's $0.40-0.60

3PEAK has gained rapid adoption in industrial and consumer electronics. Their specs often exceed the original LM358, particularly in rail-to-rail performance.

7. SGMICRO SGM358

• Pin-compatible with LM358
• GBW: 1MHz
• Supply: 2.8V to 5.5V
• Rail-to-rail output
• Price: ~$0.08-0.12

SGMICRO is one of China's largest analog IC makers. The SGM358 is their direct LM358 replacement and ships in hundreds of millions of units annually to consumer electronics OEMs.

8. Gainsil GS358

• Lower-cost alternative
• Primarily used in consumer electronics, toys, and basic signal conditioning

---

Cost Comparison Table

---

How to Choose the Right LM358 Alternative

---

Where to Buy LM358 Alternatives

PartsCube Global stocks all listed alternatives. Submit a BOM or RFQ and we'll quote within 24 hours.

• LM2904DR2G — In stock, competitive pricing
• SGM358X — Direct from SGMICRO supply chain
• TP2582-SR — 3PEAK authorized channel
• RC4558DR — Texas Instruments, in stock

---

*Guide updated: June 7, 2026. Prices are market reference and subject to change. Contact us for real-time quotes.*

References

• IPC Standards Library
• IEEE Xplore Digital Library